Kiln Tyre Support Rollers replacement
Replacement of old a Kiln tyre support roller with a new one
view
On site machining of Kiln tyre Support Rollers
By grinding to recondition in to original geometrical shape -to get the correct cylindrical shapes for Rollers with a cylindrical tolerance of max 0.5 mm , and quality of treated surface with max. roughness of the grinded surface of Ra = 3.2 μm
view
Recondition of dismantled a Kiln Support Rollers

*Cleaning of shafts from corrosion and dirt
*Working surface of roller machining by grinding
*Machining a roller on the original cylindrical shape.

view
Recondition of Kiln Support Rollers by welding

Welding the cracks on the support roller body
*Repair welding the shaft on the position where is a slide bearing located with quality of
grinding Ra = 3.2 μm.

view
Replacement or recondition of bearing housing elements
*Replacement of worn out a slide bearing for roller shaft with a new one
* Adjust a slide bearing contact surface to reduce a slide bearing working temperature
view